Unit Award Scheme
74163 REMOVING, REPLACING AND ADJUSTING A VEHICLE'S BRAKE CABLE
In successfully completing this unit, the Learner will have | Evidence needed | |
|---|---|---|
demonstrated the ability to | ||
| 1 | select a motor vehicle workshop area suitable for the removal, replacing and adjusting of the parking brake cable of a motor vehicle | Summary sheet |
| 2 | collect various tools and equipment from the storage area including sockets, long arm, spanners, pliers, torque wrench, brake clips and a hammer | Summary sheet |
| 3 | raise a motor vehicle safely using the ramp | Summary sheet |
| 4 | remove the wheel(s) using the long arm and sockets | Summary sheet |
| 5 | inspect the cable for serviceability | Summary sheet |
| 6 | remove the drum or shoe as required to access the brake cable | Summary sheet |
| 7 | remove one or more cables, depending upon the make and model of the vehicle | Summary sheet |
| 8 | replace and/or refit the cable | Summary sheet |
| 9 | adjust the cable as per the manufacturer's recommendations | Summary sheet |
| 10 | refit the drum or shoe | Summary sheet |
| 11 | refit and torque the wheels to the correct tension using the torque wrench | Summary sheet |
| 12 | test the hand brake system by pulling on the handbrake until it reaches the locking point | Summary sheet |
| 13 | return the tools and equipment to the storage area | Summary sheet |
experienced | ||
| 14 | working safely in a workshop under close supervision. | Summary sheet |
All outcomes recorded on an AQA Summary Sheet
Approved 9 November 2010Level - Entry Level