Unit Award Scheme
71120 MOTOR VEHICLE STUDIES: TUBELESS TYRES
In successfully completing this unit, the Learner will have | Evidence needed | |
|---|---|---|
demonstrated the ability to | ||
| 1 | check whether the tyre is tubeless or tubed | Summary sheet |
| 2 | select the correct tool and remove the tyre value | Summary sheet |
| 3 | break the tyre seal using a beadbraker | Summary sheet |
| 4 | select the correct side of the wheel from which to remove the tyre | Summary sheet |
| 5 | lock the wheel rim onto the tyre machine | Summary sheet |
| 6 | remove the outer tyre bead using a tyre bar | Summary sheet |
| 7 | remove the second bead and then the complete tyre using a tyre bar | Summary sheet |
| 8 | refit the tyre valve | Summary sheet |
| 9 | lubricate both beads on the new tyre with sealing solution | Summary sheet |
| 10 | fit the first bead to the wheel using the tyre bar fitting end | Summary sheet |
| 11 | fit the second bead to the wheel using the tyre bar fitting end | Summary sheet |
| 12 | inflate the tyre to the correct pressure. | Summary sheet |
All outcomes recorded on an AQA Summary Sheet
Approved 11 November 2004Level - Entry Level