Unit Award Scheme
70381 CHANGING A MOTOR VEHICLE WHEEL
In successfully completing this unit, the Learner will have | Evidence needed | |
---|---|---|
demonstrated the ability to | ||
1 | locate the spare wheel, jack and wheelbrace | Summary sheet |
2 | remove the spare wheel, jack and wheelbrace | Summary sheet |
3 | locate the tyre pressure in the vehicle's manual | Summary sheet |
4 | check the pressure in at least five tyres | Summary sheet |
5 | locate an appropriate safe jacking point on the vehicle | Summary sheet |
6 | safely remove the wheel trim, if fitted without damage | Summary sheet |
7 | slacken the wheel nuts | Summary sheet |
8 | position the jack and elevate the vehicle | Summary sheet |
9 | remove the wheel nuts and wheel | Summary sheet |
10 | fit the spare wheel and replace the nuts | Summary sheet |
11 | lower the vehicle to the ground | Summary sheet |
12 | locate the correct nut torque in the vehicle's manual | Summary sheet |
13 | tighten the nuts to the specified torque | Summary sheet |
14 | replace the wheel trim, if appropriate, in the correct orientation | Summary sheet |
15 | return the spare wheel, jack and wheelbrace to their correct storage locations safely | Summary sheet |
16 | inspect at least two used tyres and make valid comments on their legality. | Summary sheet |
All outcomes recorded on an AQA Summary Sheet
Approved 23 July 2004Level - Entry Level