Unit Award Scheme
122692 RESTORING CAR ALLOYS
In successfully completing this unit, the Learner will have | Evidence needed | |
|---|---|---|
demonstrated the ability to | ||
| 1 | plan the design for their alloy | Summary sheet |
| 2 | grind or sand any damage on the alloy, including filling in any holes and re-sanding if required | Summary sheet |
| 3 | key and flatten the alloy, sanding to enhance the new paint taking to the surface | Summary sheet |
| 4 | apply masking tape around the tyre to protect it before spraying | Summary sheet |
| 5 | re-clean the alloy and apply three layers of primer to it, leaving the appropriate drying time between each coat of primer | Summary sheet |
| 6 | flatten out the primer, re-sanding if required | Summary sheet |
| 7 | re-clean the surface to prepare it for painting, ensure there is no dust on the wheel to prepare it for lacquering, then apply three coats of lacquer to the alloy | Summary sheet |
| 8 | use the infrared drying system to finish the wheel | Summary sheet |
| 9 | remove the masking tape, then clean and polish the alloy | Summary sheet |
| 10 | display the finished alloy. | Summary sheet |
All outcomes recorded on an AQA Summary Sheet
Approved 13 December 2024Level - Entry Level