Unit Award Scheme
121103 USING A FABRIC CUTTER IN AN INDUSTRIAL SETTING
In successfully completing this unit, the Learner will have | Evidence needed | |
|---|---|---|
demonstrated the ability to | ||
| 1 | prepare the cutting room by checking for hazards prior to the session | Summary sheet |
| 2 | use the correct PPE (Personal Protective Equipment) when required | Summary sheet |
| 3 | identify the fabric required for cutting | Summary sheet |
| 4 | identify the correct side of the fabric for laying on the table, ie inside or outside | Summary sheet |
| 5 | position the fabric on the cutting table, keeping one straight edge | Summary sheet |
| 6 | apply and use the pattern, using the iron according to the pattern size | Summary sheet |
| 7 | use the lay end cutter on the cutting table according to the main health and safety regulations | Summary sheet |
| 8 | use the Eastman straight knife cutter according to the main health and safety regulations | Summary sheet |
| 9 | use the round knives when required according to the main health and safety regulations | Summary sheet |
| 10 | clean all the equipment used after the fabric cutting process has been completed | Summary sheet |
| 11 | apply the protective cover on the machinery at the end of the session | Summary sheet |
| 12 | complete the quality management system documentation for minimising the waste of material | Summary sheet |
| 13 | collate and pair all parts of the garment for production. | Summary sheet |
All outcomes recorded on an AQA Summary Sheet
Approved 21 March 2024Level - Level One