Unit Award Scheme

121089 MAKING A WOODEN SERVING TRAY WITH SUPPORT

In successfully completing this unit, the Learner will have		Evidence needed
shown knowledge of
1	how to use a plunge saw to cut rebates into lengths of pine	Summary sheet
2	how to laser cut a design of their choice to the plywood base	Summary sheet
demonstrated the ability to
3	follow the workshop health and safety guidelines and wear the appropriate Personal Protective Equipment (PPE)	Summary sheet
4	measure and mark out the component dimensions	Summary sheet
5	saw the wood using a tenon saw	Summary sheet
6	use a try square and marking gauge to measure and mark out finger joints	Summary sheet
7	saw, chisel and Plane All Round (PAR) while testing to ensure a good fit to the finger joints	Summary sheet
8	cut the waste wood using a tenon saw	Summary sheet
9	sand the wood using an orbital sander	Summary sheet
10	glue and clamp the tray together	Summary sheet
11	apply a suitable waterproof finish to the wood	Summary sheet
12	take a photograph of their completed product.	Summary sheet and/or photograph(s)

All outcomes recorded on an AQA Summary Sheet

Approved 21 March 2024Level - Entry Level