Unit Award Scheme

118851 DEVELOPING JOINERY SKILLS (UNIT 7): MORTISE AND TENON JOINTS

In successfully completing this unit, the Learner will have		Evidence needed
demonstrated the ability to
1	measure, and mark out three 150mm lengths of 44x44mm timber using a tape measure and try square	Summary sheet
2	accurately cut the timber to length using a tenon saw and bench hook	Summary sheet
3	measure and mark out a haunched tenon, with corresponding mortise, level with the ends of the timber, using a rule, try square and mortise gauge	Summary sheet
4	accurately cut the stub mortise and tenon joint using a pillar drill, tenon saw and chisel	Summary sheet
5	measure and mark out a twin tenon, with corresponding mortises, level with the ends of the timber, using a rule, try square and mortise gauge	Summary sheet
6	accurately cut the twin stub mortise and tenon joint using a pillar drill, tenon saw and chisel	Summary sheet
shown knowledge of
7	the correct processes and techniques when practising and remaking both types of joint	Summary sheet
experienced
8	watching demonstrations showing how to create twin and hunched stub mortise and tenon joints.	Summary sheet

All outcomes recorded on an AQA Summary Sheet

Approved 20 April 2023Level - Level One