Unit Award Scheme

118850 DEVELOPING JOINERY SKILLS (UNIT 5): FINGER AND HOUSING JOINTS

In successfully completing this unit, the Learner will have		Evidence needed
demonstrated the ability to
1	measure, mark out and cut two 150mm lengths of 94x20mm timber using the correct tools	Summary sheet
2	accurately mark out a finger joint, with three fingers per piece, using a rule and try square	Summary sheet
3	accurately cut the finger joints using a tenon saw, coping saw and chisel, then glue them together	Summary sheet
4	measure, mark out and cut two 120mm and two 180mm lengths of 94x20mm timber using the correct tools	Summary sheet
5	measure and mark out two through housing joints using a rule, try square and marking gauge on one 180mm piece of timber, 50mm in from the ends	Summary sheet
6	accurately cut both through housing joints using a tenon saw and chisel	Summary sheet
7	measure and mark out two hidden housing joints using a rule, try square and marking gauge on the second 180mm piece of timber, 50mm in from the ends	Summary sheet
8	accurately cut both hidden housing joints using a pillar drill and chisel	Summary sheet
shown knowledge of
9	the correct processes and techniques when practising and remaking all three joint types	Summary sheet
experienced
10	watching demonstrations showing how to create finger joints and both hidden and through housing joints.	Summary sheet

All outcomes recorded on an AQA Summary Sheet

Approved 20 April 2023Level - Level One