Unit Award Scheme

118848 DEVELOPING JOINERY SKILLS (UNIT 4): BRIDLE JOINTS

In successfully completing this unit, the Learner will have		Evidence needed
demonstrated the ability to
1	measure, and mark out four 150mm lengths of 44x44mm timber using a tape measure and try square	Summary sheet
2	accurately cut the timber to length using a tenon saw and bench hook	Summary sheet
3	use a marking gauge, try square and rule to mark out the corner bridle joints	Summary sheet
4	use a tenon saw and chisel to cut the corner bridle joints	Summary sheet
5	use a marking gauge, try square and rule to mark out the ‘T’ bridle joints	Summary sheet
6	use a tenon saw and chisel to cut the ‘T’ bridle joints	Summary sheet
7	measure, mark out and cut two 250mm and two 350mm lengths of 44x44mm timber using the correct tools	Summary sheet
8	manufacture a frame with two corner bridle joints and two ‘T’ bridle joints 80mm away from the ends	Photograph(s)
shown knowledge of
9	the correct processes and techniques when practising and remaking both joint types	Summary sheet
experienced
10	watching demonstrations showing how to create corner and ‘T’ bridle joints.	Summary sheet

All outcomes recorded on an AQA Summary Sheet

Approved 20 April 2023Level - Level One