Unit Award Scheme

118847 DEVELOPING JOINERY SKILLS (UNIT 3): ‘T’ HALVING JOINTS

In successfully completing this unit, the Learner will have		Evidence needed
demonstrated the ability to
1	measure and mark out four 150mm lengths of 47x20mm timber using a tape measure and try square	Summary sheet
2	accurately cut the timber to length using a tenon saw and bench hook	Summary sheet
3	use a marking gauge, try square and rule to mark out the ‘T’ halving joints	Summary sheet
4	use a tenon saw and chisel to cut the ‘T’ halving joints	Summary sheet
5	use a marking gauge, try square and rule to mark out the dovetailed ‘T’ halving joints	Summary sheet
6	use a tenon saw and chisel to cut the dovetailed ‘T’ halving joints	Summary sheet
7	measure, mark out and cut four 300mm lengths of 47x20mm timber using the correct tools	Summary sheet
8	manufacture a frame with two ‘T’ halving joints and two dovetailed ‘T’ halving joints 50mm away from ends	Photograph(s)
9	measure, mark out and cut two 200mm and one 300mm length of 44x44mm timber using the correct tools	Summary sheet
10	use a marking gauge, try square and rule to mark out the angled halving joints	Summary sheet
11	use a tenon saw and chisel to cut the angled halving joints	Summary sheet
shown knowledge of
12	the correct processes and techniques when practising and remaking all three joint types	Summary sheet
experienced
13	watching demonstrations showing how to create ‘T’ halving joints, dovetailed ‘T’ halving joints and angled ‘T’ halving joints.	Summary sheet

All outcomes recorded on an AQA Summary Sheet

Approved 20 April 2023Level - Level One