Unit Award Scheme

118846 DEVELOPING JOINERY SKILLS (UNIT 2): PICTURE FRAME JOINTS

In successfully completing this unit, the Learner will have		Evidence needed
demonstrated the ability to
1	measure and mark out six 150mm lengths of 47x20mm timber using a tape measure and try square	Summary sheet
2	accurately cut the timber to length using a tenon saw and bench hook	Summary sheet
3	use a mitre square to mark out the mitre joints	Summary sheet
4	use a tenon saw and mitre block to cut the mitre joints	Summary sheet
5	use a marking gauge to mark out the corner halving joints	Summary sheet
6	use a tenon saw and bench hook to cut the corner halving joints	Summary sheet
7	use a marking gauge and mitre square to mark out the mitred corner halving joints	Summary sheet
8	use a tenon saw and bench hook to cut the mitred corner halving joints	Summary sheet
9	measure, mark out and cut six 200mm and six 250mm lengths of 47x20mm timber using the correct tools	Summary sheet
10	manufacture three frames, each one using a different type of frame joint	Photograph(s)
shown knowledge of
11	the correct processes and techniques when practising and remaking all three joint types	Summary sheet
experienced
12	watching demonstrations showing how to create mitre, corner halving and mitred corner halving joints.	Summary sheet

All outcomes recorded on an AQA Summary Sheet

Approved 20 April 2023Level - Level One