Unit Award Scheme

116433 INTRODUCTION TO VEHICLE WHEELS AND TYRES

In successfully completing this unit, the Learner will have		Evidence needed
shown knowledge of
1	the key safe working practices when working with wheels and tyres	Summary sheet
2	at least two common wheel and tyre faults	Summary sheet
3	the correct replacement tyre for a specified vehicle	Summary sheet
4	the purpose of balancing a wheel and tyre assembly	Summary sheet
demonstrated the ability to
5	remove and replace at least two road wheels, using safe procedures and jacking points, axle stands and a torque wrench	Summary sheet
6	perform a visual inspection of the road wheels for serviceability, checking for damage and attachment devices	Summary sheet
7	identify the key findings of the inspection	Summary sheet
8	check and adjust the tyre pressures, measure the tread depth, remove inclusions when required and inspect the sidewalls for damage	Summary sheet
9	remove a tyre, plus its valve assembly if appropriate, from a road wheel	Summary sheet
10	fit a tyre and re-inflate it to the correct pressure, then balance the wheel and tyre assembly	Summary sheet
11	dispose of waste products in accordance with environmental guidance.	Summary sheet

All outcomes recorded on an AQA Summary Sheet

Approved 19 December 2021Level - Level One