Unit Award Scheme
116432 INTRODUCTION TO VEHICLE BODY REPAIR
In successfully completing this unit, the Learner will have | Evidence needed | |
---|---|---|
shown knowledge of | ||
1 | the key safe working practices when undertaking vehicle body repairs | Summary sheet |
2 | at least two different materials used to manufacture vehicle body components | Summary sheet |
3 | a minimum of two anti-corrosive materials used in body repair | Summary sheet |
4 | at least two types of vehicle body damage that require professional repair | Summary sheet |
5 | a minimum of two types of body damage that can be rectified by non-professionals | Summary sheet |
demonstrated the ability to | ||
6 | identify the body damage in at least two vehicle panels | Summary sheet |
7 | use panel beating tools to repair minor vehicle body damage | Summary sheet |
8 | repair a damaged vehicle panel using plastic filler | Summary sheet |
9 | remove and refit a vehicle door and either a bonnet, boot or hatch lid | Summary sheet |
10 | remove and refit the front and rear plastic bumpers of a vehicle | Summary sheet |
11 | produce a spot weld lap joint and perform a destructive test on it | Summary sheet |
12 | remove a spot weld with an appropriate tool or drill bit and replace it with a MIG (metal inert gas) plug. | Summary sheet |
All outcomes recorded on an AQA Summary Sheet
Approved 19 December 2021Level - Level One