Unit Award Scheme
109981 MAKING A WOODEN ITEM TO COMMISSION
In successfully completing this unit, the Learner will have | Evidence needed | |
|---|---|---|
demonstrated the ability to | ||
| 1 | contribute to the design specification process with ideas and suggestions for materials | Summary sheet |
| 2 | use a steel rule and a try-square to mark off the correct sizes of timber | Summary sheet |
| 3 | use a handsaw or electric jigsaw to cut the timber to the correct sizes and/or shapes | Summary sheet |
| 4 | use a plane or sanding blocks to smooth any rough edges | Summary sheet |
| 5 | use a ratchet clamp and bench vice to hold the timber steady whilst working | Summary sheet |
| 6 | use a hand drill or electric drill as appropriate | Summary sheet |
| 7 | discuss the best way to assemble components, eg using glue, nails, screws or dowels | Summary sheet |
| 8 | achieve a smooth finish using plane, wood filler and glasspaper | Summary sheet |
| 9 | apply the desired finish, eg paint or varnish | Summary sheet or Photograph |
experienced | ||
| 10 | observing safety regulations whilst working in the workshop | Summary sheet |
| 11 | observing particular safety precautions relating to the use of hand-held power tools | Summary sheet |
| 12 | using tools and construction techniques appropriate to the materials being used. | Summary sheet |
All outcomes recorded on an AQA Summary Sheet
Approved 6 December 2017Level - Level One